This website is reader-supported. When you buy through links on our site, we may earn a small affiliate commission.

How Do You Use a Drilling Stand?

Last Updated: 09.09.20

 

A drilling stand may look like a simple, one-tool job, but if you want to use it properly, you’ll need to follow a few steps. Below you can find out more about what a drilling stand is, how to use it, and the reasons why it is a must-have tool for most homeowners and handypersons.

 

What is a drilling stand?

A drilling stand is an item that is used with a drilling press to allow the operator to drill cleaner and more accurate holes. Drills can be used without a stand, but when performing heavy-duty tasks, you won’t be able to use your drill to the maximum of its capabilities without a good drilling stand.

The way in which a drilling stand works is fairly simple since it helps keep the drill firmly in position even when working with difficult materials. Without a stand, the vibrations caused by the drill bit boring into the material could cause the bit to misalign, which won’t just mess your work but can also pose a real safety hazard for the operator.

The drill is one of the most versatile tools in any workshop, but even for a tool as powerful as this one, there are limitations. The stand acts as an extension of the tool, and it seeks to enhance the performance of the drill by making it more accurate and easier for the operator to use.

Thus, for most users, a drilling stand isn’t just an accessory to their drilling press but an essential part to help them achieve their goals. If you are curious to learn more about it, below you can find answers to all the questions you may have.

 

How to use it

Before we can talk more about the benefits of a drilling stand, we should first take the time to answer the question you’ve been asking. Using a drilling stand is quite straightforward, but even for a product that’s as simple as this one, there are still a few things to consider if you want to get the most out of it and keep yourself safe.

The first step in using a drilling stand is to make sure that it is attached to a table sturdily using either vice grips or screws. If the stand is not attached sturdily, the entire contraption can become unstable due to the pressure of the drill press and the force of the vibrations. Not only can this injure you, but it can also ruin the material you’re working on.

You’ll also need to make sure that the stand is attached at a comfortable height of the worktable since you will need to apply quite a bit of pressure to the arm of the drill stand. If the worktable is too high or too low, then you’ll find it uncomfortable to use the drill stand for extended periods.

Now that you’ve attached the stand correctly, the next step is to insert the drill into the harness. The process can differ depending on the type of stand that you have, so make sure to study the user’s manual to ensure proper installation. You can assess the movement of the drill by applying pressure to the drill stand arm.

With that out of the way, you now have everything set up, and you are ready to start using the drill stand. Here things are quite simple. You’ll need to get the materials that you want to drill while making sure to use only materials that your stand is rated for.

Most drill stands will work with steel and wood, and if you want to drill other materials, you’ll need to examine the user’s manual to see if the manufacturer allows it.

Once you’ve ensured that the stand is compatible with the material you plan to drill, you can begin the drilling process by first placing the drill bit in the mouth of the drill. Make sure to tighten the bit properly.

Next, you should tilt the drill to the desired angle, depending on what type of drilling work you plan to make. Take the time to check the security of the drill in the holster once again before you begin since you can never be too safe.

You can now power the drill and press down the arm of the drill press using firm pressure. Don’t lower it too rapidly. This step will need to be repeated 3 to 4 times if you want to make a smooth hole.

This concludes the entire process. Using the drilling stand is very easy, and the only part of the process that will require a lot of attention is the setup. However, even that first step is relatively easy since most stands on the market come with comprehensive instructions to make installation effortless even for first-time users.

 

The benefits of using a drilling stand

Drilling stands are used in a variety of industries for many purposes, and most models available on the market can work with different power tools. However, the most common use for a drill stand is to bore holes in hard surfaces using a hand drill. Still, the stand is a versatile product that can handle more than one type of job.

The drilling stand can hold tools horizontally to help you sand workpieces of various sizes. It can also be used to grind or polish metal objects. Some models on the market also come with telescopic adjustments that will let you customize the drilling heights so that you can work with power tools of all sizes and shapes.

Most models also allow the angle of the clamp that holds the tool in place to be changed with relative ease. After adjusting the angle, users can lock the clamp back in place. This will allow operators to drill holes with precision even at odd angles that would be impossible to hold using just their hands.

More advanced models can also come equipped with LED lights and markings for drilling depths that will make it easier for the operator to see exactly where the hole will land.

You can also find lightweight stands that are very mobile. They come with pre-drilled holes in the base to attach it to a table for when you need good stability. Models that are built with portability in mind can be removed easily from the worktable. 

This allows you to take the stand with you to drill more accurate holes on walls, on the ceiling, or at a slant using the handle to keep the unit stable even in a horizontal position.

 

Things to consider when purchasing a drilling stand

The most important thing to consider when looking for a drilling stand is the purpose that you’re purchasing it for. If you plan to use it for small jobs around the home, then a smaller stand will do the job. However, for power users, investing in a stand that is strong and capable of handling heavy usage is worth the extra cost.

You’ll also need to take into account the power of the drill since if you have a state of the art drill that delivers a lot of force, you shouldn’t combine it with a weak stand. The stand should always be sturdier and more powerful than your drill. If the drill overpowers the stand, this will lead to inaccuracies and many other inconveniences.

Speaking of inconveniences, you should also invest in a stand that features quick-release clamps since this makes the product not only easier to operate but also more versatile. Furthermore, the clamps should have a wide opening diameter so that they can hold tools of various sizes and shapes.

If you plan to drill through round materials, such as pipes, you should look for a model that comes with a groove channel that can accommodate such materials.

While most models available on the market are designed for versatile use, you should still take the time to look if the product you’re looking at can handle other tasks. Generally, a stand that is made for drilling may not always be usable for sanding or other purposes.

The variations are generally very small, and with most stands, you can still tackle different jobs by altering the procedures slightly. However, for first-time users, it is essential to get a stand that has been designed precisely for the job at hand. After you get accustomed to using it, you might be able to find ingenious ways to use it for other tasks as well.