This website is reader-supported. When you buy through links on our site, we may earn a small affiliate commission.

Best Makita Hammer Drill Reviews

Last Updated: 26.05.20


What are the best Makita hammer drills in 2020?


If you’re looking for the best Makita hammer drill and don’t have the time to look through all the reviews available, then we’ll start out by mentioning that out of their current line of products the Makita HR2475 has the biggest chance of meeting most demands. This is because it delivers all the power you will want from a rotary hammer while still convenient enough to be used as a regular corded drill. Adding to its versatility are the three operating modes, which among other things, allow it to be employed as a gas operated hammer for removing tiles or for cracking through stones/masonry. To top it off, it also features some of the latest in proprietary Makita technology. If you’re looking for something with a bit more heft and power, then the Makita HR2641 is sure to deliver.



Comparison table


The Good
The Bad



Buying guide


Before deciding on a model, it is important to consider what specific tasks you are planning on using it for, because even the best hammer drill by Makita will prove insufficient if not properly employed. If unfamiliar with power tools, it is important to know a few things about the items you’re buying, since they rarely serve the same function.


Types of drill hammers

There are two main categories of items commonly referred to as a drill hammer, the gas piston variety, also known as a rotary hammer, and the more common disc one, frequently used by handymen around the house.

The rotary hammer is meant to take on heavy-duty jobs, like boring 1-inch holes through concrete or removing floor tiles, but it can also be employed for drilling through wood, steel, driving screws, or sinking construction screws, among many other tasks, as long as its weight doesn’t prove prohibitive.

The more common drill hammer uses disks instead of a piston to deliver the punching action. This makes it a lot lighter and easy to handle, while it can still be employed in all but the most difficult jobs you would use a rotary hammer for. These won’t endure as well through punishing regimes, however, as the two disks tend to wear from grinding on one another.




Between the two types discussed above, the disk hammer can be said to offer better versatility as its lightweight and compact frame will make it better suited for occasional home improvement projects, where it can do some of the lighter masonry work, while also acting as a regular drill.

This is especially obvious for cordless models, that offer superior portability as well as the freedom to use them with the power turned off, which will be a common situation when working around the house. These are admittedly poorer performing than equivalent corded models, but a lot of good Makita hammer drills work on batteries, for the reasons mentioned above.




Makita hammer drill reviews might mention some specifications in regards to a drill’s performance. Revolutions per minute (RPM) refers to the speed at which the chuck rotates and is important for a wide variety of tasks with drilling through light material premiere among them.

Torque, expressed in inches per pound (in.lbs.), lets you know how good the unit will be at driving long screws through hard surfaces, among other things.

The impact force, expressed in feet per pound or joules is a general measurement of the power of the unit, while the beats per minute (BPM) lets you know the frequency at which the hammer will “punch” every minute.


3 Best Makita Hammer Drills (Updated Reviews) in 2020



With so many quality Makita hammer drills out there it can be hard finding the right one. Not to worry, we’ve looked through scores of reviews of Makita hammer drills and selected a handful of the best received models available for sale.



1. Makita HR2475


The HR2475 offers a lot of force from a relatively low powered but highly reliable motor. It primarily does this by maximizing the efficiency of its transmission through some advanced engineering, which includes the use of interlocking steel laminations and dual armature for the ball bearings.

It also employs something called “sequential impact timing,” which can increase the drilling time by up to 50% by minimizing the overlaps between bit impacts.

Customer reviewers find this to work surprisingly well, and can significantly reduce the time required to finish a job.

The unit also offers a good level of versatility, with three different operating functions that can either allow it to work as a simple drill; to hammer while the bit is rotating; or to hammer with a static bit, like an automatic chisel.

To safeguard its transmission from potential accidents, like the bit bending and substantially increasing the load, the HR2475 operates an automatic system that decouples the gears when sudden stops occur.

Buy from for ($160.67)




2. Makita HR2641X1


The HR2641 uses an 8 Amp motor to deliver up to 2.1 ft.lbs of impact, which should make it as powerful as the 2475 we’ve already looked at. But this model could be said to have an ace up its sleeve since it’s somewhat easier to operate, including for overhead drilling.

The 2641 model does this by employing an internal counterbalance system for minimizing vibration, and an integrated damper spring at the base of the impact bolt.

As is usual with Makita, users report that this works discernibly well, and only light vibration is felt, even when employed for difficult applications.

Otherwise, it offers a similar degree of versatility to the 2475 rotary hammer, with the same three functions for drilling, hammering + drilling and hammering.

Since it’s also relatively light, at only 7.1 lb of net weight, it can be employed for lighter work around the house, in case a drill driver isn’t available.

Not in the least, it comes packaged together with an angle grinder, which makes it of great value.

Buy from for ($199)




3. Makita XPH07Z LXT


This is the premium model in the already well appreciated XPH series of light drill hammers from Makita, and it performs as well as one would expect.

Its motor delivers up to 1,090 in.lbs of maximum torque, which it’s an impressive figure for a battery powered unit.

The battery is sadly not included, but what you can buy separately from the company will hold its charge for a significant amount of time, as this uses a brushless motor which is 50% more energy efficient than traditional designs.

This highly efficient and reliable motor is linked to a 2-speed transmission, which can spin the chuck at 0-550 or 0-2,100 RPM, depending on the requirements of the task.

Like any small and compact drill that uses a disk system, it provides a great degree of versatility for home improvement, where it can be employed for anything from driving screws to punching ½-inch holes through bricks.

Buy from for ($139.99)



We have more! Check our recent articles:

Best corded rotary hammer drill

Safe demolition gloves

Ryobi P222