This website is reader-supported. When you buy through links on our site, we may earn a small affiliate commission.

Best Drill for Mixing Mud Reviews

Last Updated: 09.12.21


What are the best drills for mixing mud in 2021?


If you’re not inclined to spend a considerable amount of your time looking through reviews of drills for mixing mud but still want to find out what are some of the best products available for sale, then the following paragraph should tell you everything you need to know. After analyzing feedback from both casual users and specialists alike, our research team found that the Makita DS4012 would be the model most worthy to consider, as it offers a great balance between power and handling. At only 6.2 lb it’s light enough for comfort and the 8.5 Amp motor should give it plenty of torque to cut through thick concrete. If the DS4012 isn’t available, the Hitachi D13 will make for a good alternative pick.



Comparison table


The Good
The Bad



Buying guide


All the better drill reviews out there might provide you with good information about what makes a general purpose drill high performing — a fast spinning chuck, good torque, adaptability, etc. — but mud and concrete mixers can be said to be in a class of their own, as there are certain characteristics they must excel at over more versatile products. What are some of the features to be mindful of when looking for the best drill for mixing mud?




Mud mixers will have to churn through quite a lot of viscous material, with a relatively large paddle bit attached. To do this adequately, the motor will have to put out a substantial amount of torque, so all the heavy mud or concrete gets pushed aside.

The torque is generally measured in feet per pound, and a good value for a mixer should start at around 4.5 ft/lb. As with all corded drills, the overall power of the motor is measured in amps, with most units fit for regular use developing around 6 to 8.  

In order to effectively whip through the mix and make it thinner, the paddle should move at relatively high speed, so RPMs (revolutions per minute) is also a value to look for. The demands, however, aren’t as high as with other drills or drivers, so you wouldn’t be looking at products in the 1000 RPM ranges.




Mixing mud and cement for considerable amounts of time will put the unit through a lot more strain than regular drilling or driving work, so the best drill for mixing drywall mud should be a lot less prone to smoking or overheating than a similarly priced generalist model.

This will also make it suitable to be used as a heavy-duty regular drill, with the appropriate bit attached, although it might not perform the best in these roles due to its slightly lower chuck speed.




As they are supposed to be pointed downwards when operated, most drill mixers feature a spade handle at the end, which is ideally adjustable so you won’t have to hold the whole unit at an awkward angle when moving it around.

A top or side handle is equally common, although some users find this to get in the way often enough for manufacturers to usually make it removable, or at least entirely collapsible.



3 Best Drills for Mixing Mud (Updated Reviews) in 2021



To narrow down the list of potential purchases for our readers — which can contain a whole lot of items — we’ve looked through a large number of customer reports and professional reviews and selected some of the products that received the best feedback for your consideration.



1. Makita DS4012


Very well rated on retail sites, this Makita product offers a great mix of high performance and handling, which will make it easy and comfortable to use for hours on end. The 8.5 Amp motor will prove more than fit for this type of extended usage, as most customers find it particularly reliable.

It also comes with all the features you would expect from a top-end manufacturer like Makita. Its drive is reversible to help you out when drilling and the speed at which it operates is variable, from 0 to 600 RPM, to better adapt to the consistency and thickness of the mixed material.

It has a removable upper handle so that it can be held horizontally to its axis when the situation demands it and a fully adjustable D handle at the end. This can be rotated and fixed into 24 positions, offering a lot of freedom.

Perhaps more importantly when thinking of operator comfort, its full weight is only 6.2 lbs, which is definitely in the lower ranges for an item in its class. The chuck might be spinning a little slow for certain mixes of concrete, but this shouldn’t be an impediment for mixing drywall mud.

Buy from




2. Hitachi D13


This Hitachi model seems to lean towards handling and ease of use when weighing this against the maximum power provided. Regardless, with a 6.2 Amp motor it should be able to handle any job an amateur DIYer will put it through when home improvement and most tasks commonly associated with professional building sites.

The 6.2 Amps also seem to be put to good use with an adequate transmission, which allows it to develop 5.5 ft/lb of torque, more than enough for mixing drywall mud, although some users find it suitable enough for drilling through average essence wood.

For increased maneuverability, it has a three position adjustable top handle, which can be easily moved out of the way when the task doesn’t require its use. Like with many similar products, this is supplemented with a “spade” handle, particularly useful when holding the unit nose down for mixing construction material. This can be adjusted to two positions.

A full reverse function is also included, to better drive nails or bits out of walls, as well as auto-stop carbon brushes, to protect the machine’s armature, extending its life.

Buy from




3. Genesis GSHD1290


The GSHD1290 includes most of the functions found on premium models and thanks to its high specs might do as good a job as well, but at only a fraction of the cost. It has both a reverse function and variable speed control, which should give it great versatility for whatever material you might be working with.

With 850 RPM, the shovel bit should have enough speed to whip through any sort of drywall mud and most cement mixes used in light construction work. The 9 Amp motor gives it a maximum of 8.9 ft/lb of torque at the optimum spinning rate which definitely places in the upper ranges for its weight class.

Speaking of weight, the Genesis is significantly heftier than other products we found well suited for mud mixing. At 8.8 lb and high torque, it might prove a bit of a handful for such a relatively undemanding task. Regardless, it’s easy enough to hold on to, with three handles to give you plenty of grip for multiple angles.

A more important problem might be the fact that, as with any affordable product, you might stumble unto a dud which stops working after a couple of weeks, so it will be advisable to be careful with the warranty.    

Buy from