This website is reader-supported. When you buy through links on our site, we may earn a small affiliate commission.

Best Drill Press Vise Reviews

Last Updated: 12.08.22


What are the best drill press vises in 2022?


If you don’t have time to browse through all the reviews and excellent buying advice prepared by our researchers, then this short paragraph should tell you everything you need to know about the best drill press vises. In the process of finding the best products around, we have looked at consumer reviews, sales figures, reliability surveys and we discovered that the IRWIN 226340 is currently the one worthy of being called the best in this category. The product is made of forged iron, which grants it great sturdiness and durability, so you can rest assured that you will be able to use this model for a long time. Capable of accommodating various widths, and with a clamping capacity of 4.5 inches, this is the type of tool you should get when you need to deal with thin layers of material that must be drilled in a vertical position, for more complex DIY projects. Equipped with a heavy weight, the drill press vise reviewed here keeps your stock where you need it, without any problems. If the IRWIN 226340 is temporarily unavailable, you should go for the Wilton 69997 as it is almost just as good.



Comparison table


The Good
The Bad



Serving as a reliable component for use with the best drill press you can find on the market, a drill press vise holds down the work piece and keeps it still during your hole cutting operation. It can serve both as a manual component or a drilling device. A lot of workshops use machining vises for applications that require tight tolerance levels and high precision. Manual vises boast plenty of merits, but a drill press vise is more suitable for holding down a stock during high-speed drilling. With the amount of vibration that is experienced during drill press use, you will need your vise to be capable of dampening vibrations and providing excellent stability.


Buying guide


Design and Construction

You want a product featured in drill press vise reviews to be optimally constructed as a heavy-duty component. Typically, drill press devices are made of cast iron. They have replaceable steel jaws. Aside from that, you want the unit to be designed to hold your stock stationary during grinding, shaping, drilling and milling. A swivel base is a distinctive characteristic of heavy-duty vises, and so are smooth jaws. This is a premium aspect compared to medium-grade machine vises that only have one smooth grooved jaw.

The vise should easily adapt to any drill press. It should be suitable for the primary purpose of your drill press machine.





For extreme flexibility, you may find a drill press milling vise that is of the any-angle precision variety a good unit to own. It offers up to 45 degrees angle tilting capability in both directions.

A so-called “any-angle” precision machine vise is extremely flexible, offering up to 45 degrees of angle tilting capabilities in either direction.

An ultra-precision vise is generally used for inspection and grinding operations, and typically has one grooved and one smooth jaw.

A self-centering vise comes with two movable jaws that center themselves fully on the stock.

A cross slide drill press vise is perfect for applications that require the stock to be precisely centered.




Owning a pin vise drill might enable you to do small drilling applications or do-it-yourself projects but if you have a workshop, you will have to use a powered tool such as a drill press to perform regular, heavy-duty hole drilling.

You need an any-angle precision drill press vise with a 90-degree vertical tilt so you can position your stock at a right angle to the work table surface.

For grinding or inspection operations, you will need an ultra-precision vise that can be fastened to a workbench. This kind of device typically comes with a steel body, and one grooved plus one smooth jaw.

For drilling and milling applications, especially where an accurately centered work piece is needed, a self-centering vise is perfect.

Drilling, light milling and other lighter applications, along with variable angle drilling and milling can be carried out using a cross-slide drill press that moves on two axes.



4 Best Drill Press Vises (Updated Reviews) in 2022



1. IRWIN 226340


1. IRWIN 226340 4-Inch Drill Press ViseMade of forged iron, the IRWIN 226340 4-Inch Drill Press Vise has been proven to be a well-engineered device that is also effortless to use. It offers reliable functionality for precise drilling or for thin projects that have to be drilled at a vertical position. The four-inch jaw width accommodates typical work piece widths, as does the 4.5-inch clamping capacity. The1/2-inch throat depth offers precise pressure for drilling operations. Made of forged iron, this drill press vise provides a clamping pressure of 1000 pounds to ensure exceptional clamping and stability of your work piece during the drilling operation.

For this size, the drill press size comes with a heavy weight to ensure that it can hold your stock in place really well. It offers the necessary flexibility for mounting almost anything to your drill press table. It saves your fingers from injury and is easy to hang on the side of the drill press table.



Crafted of forged iron, this drill press vise offers long-lasting durability to support years of use with your favorite drill press.

The slotted base enables the easy positioning of the stock to be drilled and also guarantees an effortless installation into the drill press worktable to provide a sturdy platform to hold the stock in place.

The textured jaws of this vise provide enough traction to hold the workpiece in place with a secure grip, guaranteeing operator safety to keep the stock from getting flung into the air because of the torque.

The 4.5-inch jaw capacity makes the tool suitable for light-duty tasks, providing pressure and stability during drilling applications.

The vise delivers a clamping pressure of 1000 pounds to hold the workpiece securely so as to ensure the precise drilling of holes.



The textured internal surface of the jaws on this vise can leave marks on softer stock such as aluminum bars but they can be polished out.

Buy from




2. Wilton 69997


2.Wilton 69997 4-Inch Drill Press Vise With Stationary BaseAlthough it is designed to fit most drill presses, the Wilton 69997 4-Inch Drill Press Vise is an excellent large vise for use with a 10-inch drill press. The 4-inch vise has a tank-like solid build and can easily hold down a 4-inch by 4-inch work piece. The unit has easy mounting slots and a special pivot handle structure that provide added clamping pressure. Made with hardened steel jaws, this drill press vise is engineered to handle fine work thanks to the moving jaw that operates off one screw, ensuring that it does not position the sides of the jaw along a parallel line.

The design of the drill press vise enables it to allow the drill bit to pass through the work piece, through the vise itself and through the hole in the drill press table. Any part of the vise will not be struck by your drill bit as long as the stock is positioned at the center between the jaws.



This drill press vise is suitable for use with most drill presses with its 4-inch flat dimensions that allow the operator to secure the stock in place to prevent it from getting cast into the air when the drill press is in operation.

The hardened steel jaws hold the stock securely in place, ensuring a solid hold without sacrificing precision while drilling.

The easy mounting slots allow the easy clamping down of the workpiece to the drill press table to prevent it from moving around during the drilling operation.

The unique pivot handle design facilitates the tightening of the clamping jaws to secure the stock between them and provide a solid grip.

Get extra clamping pressure from the pivot handle design while the stationary base provides the necessary support for the stock from the bottom.



One customer had to sand the paint off the bottom of the drill press vise at the onset to ensure a genuinely flat mounting.

Buy from




3. Shop Fox D4082


3.Woodstock D4082 4-Inch Cross-Sliding ViseHefty at 22 pounds, the Shop Fox D4082 4-Inch Cross-Sliding Vise is built solid with an exclusive slide bar that prevents the jaws from tilting sideways or up when the stock is being tightened. It features adjustable gibs that take up any slack on both the bottom and top slides. The vise can be used with your drill press when doing light milling jobs and cutting keyways. The jaw width is 4 inches and the jaw opening measures 3 ¾ inches, for easy centering and positioning of your work piece.

Both the bottom and top slide travel are at 4 inches, accommodating thick stocks while ensuring problem-free centering. The two aluminum adjustment crank handles offer sufficient durability with their cast aluminum construction. They are virtually unbreakable. If you are looking for a reasonably well-made drill press vise that is built heavy for ample stability and reliability, the Shop Fox D4082 4-Inch Cross-Sliding Vise should be the first item on your list.



With its maximum jaw capacity of four inches, this drill press vise is suitable for light-duty drilling tasks to help you optimize the use of your drill press.

The exclusive slide bar prevents the jaws of the vise from tilting sideways or upward when you are tightening them, which delivers a secure, immobile hold on the workpiece.

The vise is equipped with adjustable gibs that take up any slack on the top and bottom slides of the unit to ensure a genuinely solid grip.

This vise allows use with a drill press when you need to cut keyways or to perform light milling tasks where safety is a top concern.

Heavy at 22 pounds, this drill press vise is reasonably well-made so you are assured of durability and lasting tool life.



This drill press vise has to be taken apart although it ships fully assembled, to ensure that the lubricated grime, variously-sized particulates, and metal chips that come from the manufacturing process are adequately removed prior to the initial use.

Buy from




4. Wilmar Performance Tool W3939


4.Wilmar Performance Tool W3939 Drill Press ViseMade with grooved or edged jaws that prevent slipping of the clamped work piece, the Wilmar Performance Tool W3939 Drill Press Vise offers exceptional support to your drill press. It is built with a pivot handle that facilitates effortless turning to position your stock securely in place. The slot design elongated mounting holes enable problem-free attachment to your machine, as they match right up to those on your drill press table. The Wilmar Performance Tool W3939 Drill Press Vise comes with a durable construction. The solid build ensures smooth operations and full performance from your powered equipment.

You won’t imagine doing drilling applications without this component to support your drill press. Keeping the work piece stationary, the drill press vise has a maximum opening of less than 2 ¼ inches, enabling you to execute thin applications with ease. Holding the work piece securely is a breeze, as is attaching the component to your existing work table.



Designed with a 2.5-inch jaw width, this drill press vise facilitates a range of light-duty drilling tasks using reasonably thick stock that has to be held in place tightly on the drill press table.

The etched jaws prevent the workpiece from slipping away between them, ensuring operator safety during drilling so as to prevent the stock from getting flung out because of the torque from the drill press.

The pivot handle facilitates the tightening of the jaws of the vise so no special tool is necessary to clamp the jaws closed against the stock.

The slot design makes it easy to fasten the workpiece securely and prevents issues on proper positioning and placement.

The mounting holes enable the easy alignment of the drill press vise onto the drill press to facilitate the attachment of the accessory for precise hole-cutting results.



One customer has noted that this device has poorly-cast sides so there is a bit of sharpness in them.

Buy from